User Guide

14
WARNING ! See warnings on inside back cover.
Proper use and maintenance of the equipment is essential to its ability to function. Over time, parts and pieces will become
worn or damaged, and they will require replacement. Operating equipment with damaged or worn parts can decrease the
unit’s ability to protect, decrease airflow, and could result in serious personnel injury or even death.
Before each use of the product, please inspect for any rips, damages, tears, etc.
Part(s) Part # Description: Notes:
Lens Cover L-133 Disposable Lens Covers Disposable lens covers help protect the visor from scratches
and distortions. Replace as needed to insure proper visibility.
Available in packs of 25 (L-133-25) or 100 (L-133-100)
Faceseals and L-121 Tychem
®
QC Faceseal Faceseals insure that a proper seal is maintained with the wearer’s
Shrouds skin. Damaged or worn faceseals can cause leaks, which could
decrease airflow, battery life, and increase the risk of exposure
L-123
1
Tychem
®
QC Shroud
L-124
2
Flame Retardant Faceseal - Polyester
L-125
3
Flame Retardant Shroud
L-128
4
Cordura Nylon Shroud
L-120 Faceseal, Flame Retardant - Softguard
Lens Assembly L-130 Wide-view Faceshield Assembly
L-131 Wide-view Lens
L-132 Wide-view Lens, High Temperature For use in high temp environments, where there exists potential for
warping of the lens
L-134 Latch Kit Replace latches when missing or broken. Do not use unit if latches are
defective
L-136 Cam Spring Set Replace when faceshield will not stay in up or down position, or if
the faceshield is loose in a closed position
L-137 Wide-view Faceshield Extender Replace assembly when warped
Head Suspension L-112 Chin Strap Accessory. Replace when worn or damaged
L-113 Head Suspension Replace when bracket damaged or it will not tighten
L-115 Sweat Pad Replace when dirty or when foam begins to degrade
L-116 Head Pad Replace when dirty or damaged
L-117 Hanger Suspension Replace when broken
External Knobs L-140 Knob Replace when missing or broken
L-141 Knob and Pivot Kit Replace when missing or broken
Helmet and L-163 Head Seal Kit Replace when dirty or damaged
Head Seal
L-182 Air Deflector Replace when missing or broken
L-183 Headgear Cover Prevents scratches and damage to the headtop
1
For L-901 series helmets only
2
Flame retardant faceseal for L-500 and L-700 series helmets.
3
Flame retardant shroud for L-900 Series helmets only.
4
Cordura Nylon fabric shroud for use with L-900 Series only.
L-Series Spare Parts and Accessories