User Guide

23
WARNING ! See warnings on inside back cover.
3M
™
Supplied Air
*
Respirators — Product Matrix
Breathing Tube
Headgear
L-501 L-503 L-505 L-701 L-703 L-705 L-901 L-905
AAD#37008
Bumpcaps Hardhats Helmets
L-122
Breathing Tube
AAD#37012
Air Control Device
V-100 V-200 V-300 V-400
Vortex Cooling Vortemp
™
Air Regulating Low Pressure
Assembly Heating Assembly Valve Assembly Connector Assembly
AAD#37018 AAD#37019 AAD#37020
Supplied Air Hose
W-9435 W-2929 W-3020
3
⁄8'' High
3
⁄8'' High
1
⁄2'' Low
Pressure Hose Pressure Hose Pressure Hose
(25, 50, or 100 ft.) (25, 50, or 100 ft.) (25, 50, or 100 ft.)
25 ft. #07010
50 ft. #07011
100 ft. #07012
25 ft. #07033
50 ft. #07034
100 ft. #07035
Portable Air
Purification Panels
256-02-00 256-02-01 W-2806 Note: W-2808
(50 cfm) with CO (100 cfm) with (50 cfm) without CO Monitor
Filtration and Monitor CO Monitor CO Monitor Retrofit Kit
#07006 Available
#37027
Note: Headgear, breathing tube, air control valve,
and compressed air supply hose are required
parts in a NIOSH-approved system. Any NIOSH
certification appearing on 3M components is strictly
limited to use in an approved air system and only in
full accordance with the specifications and limitations
under said approval. NIOSH certifies complete
assemblies only, not sub-assemblies.
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D
breathing air per the Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table
for the quality of compressed breathing air.
3M Automotive Aftermarket Division (AAD) Product Numbers are found in blue type on select products