User Guide

www.3m.com/OccSafety/WorkerSafety
24
WARNING ! See warnings on inside back cover.
3M
™
Supplied Air
*
Respirators — Product Matrix
Breathing Tube
Headgear
Hoods Abrasive Blasting
H-400 H-600 W-8100B
Series Series
AAD#07030 AAD#07044
W-5114 W-8003
Breathing Tube Breathing Tube
AAD#07031
Air Control Device
W-3018 W-2907 W-2862 W-2863
Low Pressure Air Regulating Vortex Cooling Vortemp
™
Heating
Connector Assembly Assembly Assembly Assembly
AAD#07032 AAD#07029 AAD#07028
Supplied Air Hose
W-3020 W-9435 W-2929
1
⁄2'' Low
3
⁄8'' High
3
⁄8'' High
Pressure Hose Pressure Hose Pressure Hose
(25, 50, or 100 ft.) (25, 50, or 100 ft.) (25, 50, or 100 ft.)
25 ft. #07010
50 ft. #07011
100 ft. #07012
25 ft. #07033
50 ft. #07034
100 ft. #07035
Portable Air
Purification Panels
256-02-00 256-02-01 W-2806 Note: W-2808
(50 cfm) with CO (100 cfm) with (50 cfm) without CO Monitor
Filtration and Monitor CO Monitor CO Monitor Retrofit Kit
#07006 Available
#37027
Note: Headgear, breathing tube, air control valve,
and compressed air supply hose are required
parts in a NIOSH-approved system. Any NIOSH
certification appearing on 3M components is strictly
limited to use in an approved air system and only in
full accordance with the specifications and limitations
under said approval. NIOSH certifies complete
assemblies only, not sub-assemblies.
3M Automotive Aftermarket Division (AAD) Product Numbers are found in blue type on select products
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D
breathing air per the Compressed Gas Association Commodity Specification G-7.1-1997 in the U.S. In Canada refer to CSA Standard Z180.1 table for the
quality of compressed breathing air.