User Guide

4
WARNING ! See warnings on inside back cover.
Dusty Conditions/Nuisance Odors
3M
™
Cool
Flow
™
Carbon Braided
Product NIOSH Suggested Exhalation Nose- FaceSeal/ Filter Comfort
Number Classification
1
Applications Valve clip
2
Nose Foam
3
Material
4
Straps Other
3M
™
Filtering Facepiece Particulate Respirators
3M Automotive Aftermarket Division (AAD) Product Numbers
are found in blue type on select products
1. N95 – Not for oil, at least 95% efficient R95 – Oil resistant, at least 95% effective P95 – Oil proof, at least 95% efficient N100 – Not for oil, at least
99.97% efficient P100 – Oil proof, at least 99.97% efficient 2. S – Standard adjustable noseclip M – M-noseclip 3. NF – Nose foam FS – Faceseal
4. AG – 3M recommended nuisance level acid gas relief (nuisance levels are less than OSHA PEL) OV – 3M recommended nuisance level organic vapor relief
(nuisance levels are less than OSHA PEL) OZ – 3M recommended for ozone protection up to 10X OSHA PEL (Not NIOSH approved for ozone)
Additional Information
3M’s NIOSH approved filtering facepiece respirators contain no
components made from natural rubber latex. Consult the
Material Safety Data Sheet (MSDS) for specific materials of
construction. MSDS’s are readily available on our website at
3M.com/OccSafety.
Important
All 3M
™
Filtering Facepieces are NIOSH approved respirators.
Before using, you must determine the following:
1. The types of contaminants for which the respirator is being
selected and exposure time.
2. The concentration level of the contaminant(s). Do not use for
aerosol concentrations that exceed 10 times the OSHA PEL or
applicable occupational exposure limit, whichever is lower.
3. Whether the respirator can be properly fitted to the
wearer’s face. Do not use with beards, or other
conditions that prevent a good seal between the face
and the sealing surface of the respirator.
4. Before required use of filtering facepiece respirators,
a written respiratory protection program must be
implemented, meeting all the requirements of OSHA
29 CFR 1910.134 including medical evaluation,
training, and fit testing.
8246 R95 Aluminum smelting, S NF AG x
Paper processing,
Brewing operations,
Glass etching,
Chemical processing
8247 R95 Foundry operations, S NF OV x
AAD#07186 Undercoating, Lab
settings, Agriculture,
Petrochemical
processing
8516 N95 Aluminum smelting, x M AG x Soft
Paper processing, inner
Brewing operations, materials
Glass etching,
Chemical processing
8576 P95 Aluminum smelting, x M AG x Soft
Paper processing, inner
Brewing operations, materials
Glass etching,
Chemical processing
8577 P95 Foundry operations, x M OV x Soft
Undercoating, Lab inner
settings, Agriculture, materials
Petrochemical
operations