User Guide

General

• Removal of gasket adhesive from painted door enclosures

Removal of sealant @ 12,000 RPM

Test Results

eel Tests

A test protocol similar to the peel tests in MIL-PRF-81733D was used to investigate possible adverse

effects of SR Radial Bristle Discs on sealant adhesion after disc use. Samples were coated with

sealant, which was then removed with SR Radial Bristle Discs, followed by isopropyl alcohol wipe.

Sealant was then reapplied to the surfaces and peel tests conducted. Samples showed no adhesive

failures at sealant/coating interface; all showed cohesive failure within sealant.

Cohesive or

Substrate Sealant Immersion Fluid Adhesive Failure

7075 T6 with MIL-C-81706 PS 870-B-2 None Cohesive

7075 T6 with MIL-C-81706 PS 870-B-2 MIL-PRF-83282 Cohesive

7075 T6 with MIL-C-81706 PS 870-B-2 MIL-PRF-23699 Cohesive

2024 T3 prepared with PS 870-B-2 None Cohesive

MIL-C-81706 and coated with

MIL-C-27725

2024 T3 prepared with PS 870-B-2 MIL-PRF-83282 Cohesive

MIL-C-81706 and coated with

MIL-C-27725

2024 T3 prepared with PS 870-B-2 MIL-PRF-23699 Cohesive

MIL-C-81706 and coated with

MIL-C-27725

2024 T3 prepared with PS 870-B-2 MIL-PRF-7808 Cohesive

MIL-C-81706 and coated with

MIL-C-27725