User Manual
Table Of Contents
- Safety information
- Regulatory compliance
- Overview
- Touch screen monitor controls
- Control card
- Startup and shutdown
- Managing the 3M™ SelfCheck™ System
- Usage reports
- Setup pages
- General maintenance
- Solving problems
- FAQs
- How can I change screen messages?
- Does the 3M™ SelfCheck™ System operate with SIP 1.
- What happens if a customer is not allowed to borrow materials?
- Does the 3M™ SelfCheck™ System follow the library'
- Does the 3M™ SelfCheck™ System do renewals?
- Does the customer need the book for a renewal?
- Does the 3M™ SelfCheck™ System recognize items on
- Will the 3M™ SelfCheck™ System still desensitize i
- What happens if a customer tries to check out a book that is on loan to someone else?
- How can I change the sound volume?
- Boot and Login Problems
- ACS conflicts notification
- Printer problems
- Check-in/checkout problems
- Cannot check out books
- Cannot read magnetic cards
- Cannot read smart cards
- Cannot read the customer or item ID
- Cannot select Mag Card or Smart Card as the customer identifier
- The Media check is not working
- Some customers are not allowed to check out items
- Customers are unable to renew items
- Customers are unable to check out videos
- Customers are unable to check out audio tapes
- Receipt Problems
- Scanner problems
- Power problems
- Messages do not display correctly
- Other Problems
- FAQs
- Obtaining service and supplies
- Appendix A: Email notification messages
- Appendix B: Scanner Adjustment Template
37
Operation Mode
Sets one of the four modes of operation. After changing the
operation mode, you must restart the SelfCheck system (see
page 23).
Normal
The normal mode of the SelfCheck system. The system is
communicating with the ILS and operating normally.
Operation Modes
Demo
Allows item checkout for training or demonstrations. While in Demo mode, the
SelfCheck system uses a simulated circulation system and does not communicate
with the ILS.
Offline
Is available only if the store and forward option has been purchased. This mode
enables operation when the circulation system is unavailable. If the SelfCheck system
loses the connection to the circulation system, it displays an out-of-service notice and
halts all transactions. You must then set the system to Offline mode to enable it to
perform transactions. Offline transactions are stored in the SelfCheck system for
forwarding to the circulation system when it is back online.
Out of Service
Displays the out-of-service graphic on the SelfCheck system screen.
To select an operation mode
1
In the
Operation Mode
box, click the operation mode you want, and then click
Set Mode
.
2
At the bottom of the page, click
Shutdown
.
3
In the shutdown dialog box, click
Restart
.
Logging
Turns logging on or off, specifies a particular logging level,
allows log viewing, and saving of the log file. Leave the log level
set to
INFO
unless 3M support personnel request a change.
To change the logging level
1
Choose a logging level. Each level includes all levels below
it except
OFF
.
2
Click
Set Level
.
Logging levels