User Manual
Table Of Contents
- Safety information
- Regulatory compliance
- Overview
- Touch screen monitor controls
- Control card
- Startup and shutdown
- Managing the 3M™ SelfCheck™ System
- Usage reports
- Setup pages
- General maintenance
- Solving problems
- FAQs
- How can I change screen messages?
- Does the 3M™ SelfCheck™ System operate with SIP 1.
- What happens if a customer is not allowed to borrow materials?
- Does the 3M™ SelfCheck™ System follow the library'
- Does the 3M™ SelfCheck™ System do renewals?
- Does the customer need the book for a renewal?
- Does the 3M™ SelfCheck™ System recognize items on
- Will the 3M™ SelfCheck™ System still desensitize i
- What happens if a customer tries to check out a book that is on loan to someone else?
- How can I change the sound volume?
- Boot and Login Problems
- ACS conflicts notification
- Printer problems
- Check-in/checkout problems
- Cannot check out books
- Cannot read magnetic cards
- Cannot read smart cards
- Cannot read the customer or item ID
- Cannot select Mag Card or Smart Card as the customer identifier
- The Media check is not working
- Some customers are not allowed to check out items
- Customers are unable to renew items
- Customers are unable to check out videos
- Customers are unable to check out audio tapes
- Receipt Problems
- Scanner problems
- Power problems
- Messages do not display correctly
- Other Problems
- FAQs
- Obtaining service and supplies
- Appendix A: Email notification messages
- Appendix B: Scanner Adjustment Template
54
Barcode Scanner
Enabled
Enables or disables the barcode scanner.
COM Port
Is the COM port for the barcode scanner.
No Read Barcode
The message the scanner sends to the software when it
can’t read a barcode. Do
not
change this setting.
Long Line Delay
Defines the point where the scan line begins. This is
expressed as a percentage of the maximum length
possible for the scan line. If this is set to 34, for
example, the first 34% of the maximum length of the
scan line is suppressed. See the figure.
Long Line On Time
Defines the area of the actual scan line. This is
expressed as a percentage of the maximum possible
length. If this is set to 50, for example, the scan line will
be 50% of the maximum length and the line will begin at
the
Long Line Delay
setting. See the figure.
Barcode scanner settings
Scanner
Maximum Possible
Scan Line Length --100
Long Line
Delay Area
34
Long Line
on Time Area
50
Actual Beam Length
Beam
Starts
Beam
Ends
scan_line_adjust
Scan Line Adjustments
Media Check
Enabled
Enables or disables the Media Check, an optional
device used to sensitize and desensitize magnetic
media.
Mediacheck settings