User Manual
Table Of Contents
- Safety information
- Regulatory compliance
- Overview
- Touch screen monitor controls
- Control card
- Startup and shutdown
- Managing the 3M™ SelfCheck™ System
- Usage reports
- Setup pages
- General maintenance
- Solving problems
- FAQs
- How can I change screen messages?
- Does the 3M™ SelfCheck™ System operate with SIP 1.
- What happens if a customer is not allowed to borrow materials?
- Does the 3M™ SelfCheck™ System follow the library'
- Does the 3M™ SelfCheck™ System do renewals?
- Does the customer need the book for a renewal?
- Does the 3M™ SelfCheck™ System recognize items on
- Will the 3M™ SelfCheck™ System still desensitize i
- What happens if a customer tries to check out a book that is on loan to someone else?
- How can I change the sound volume?
- Boot and Login Problems
- ACS conflicts notification
- Printer problems
- Check-in/checkout problems
- Cannot check out books
- Cannot read magnetic cards
- Cannot read smart cards
- Cannot read the customer or item ID
- Cannot select Mag Card or Smart Card as the customer identifier
- The Media check is not working
- Some customers are not allowed to check out items
- Customers are unable to renew items
- Customers are unable to check out videos
- Customers are unable to check out audio tapes
- Receipt Problems
- Scanner problems
- Power problems
- Messages do not display correctly
- Other Problems
- FAQs
- Obtaining service and supplies
- Appendix A: Email notification messages
- Appendix B: Scanner Adjustment Template
72
General maintenance
Replacing the printer paper
When the printer paper runs out, use one of the following procedures to
replace it with a new roll of paper:
To replace the paper in a recessed printer
1
Remove the cover plate.
2
Squeeze the open button on the left side of the cover and lift the
printer cover.
3
Place the paper roll in the printer so the paper unwinds from the
bottom.
4
Pull the front edge of the paper out until it is past the front edge of the
printer.
5
Close the printer cover.
6
Replace the cover plate.
To replace the paper in a top-mounted printer
1
Squeeze the open button on the left side of the cover and lift the
printer cover.
2
Place the paper roll in the printer so the paper unwinds from the
bottom.
3
Pull the front edge of the paper out until it is past the front edge of the
printer.
4
Close the printer cover.
To order printer paper rolls, see "Obtaining service and supplies" on
page 81.
6400
_
UG
_
04
SQUEEZE
TO OPEN
Opening the printer
Cleaning the components
The SelfCheck system components can become dirty with normal use and
may require cleaning. To clean the component exteriors, dampen a soft cloth
with water or a mild cleaning solution and gently wipe away dirt from the
affected areas.
Cleaning the monitor
Shut down the SelfCheck system.
Use care when cleaning the SelfCheck system monitor.
Use pre-moistened towelettes that are sold specifically for monitor
cleaning. If these are not available, you can use isopropyl alcohol or
water to dampen a soft cloth, but use it very sparingly.