User Manual
Table Of Contents
- Safety information
- Regulatory compliance
- Overview
- Touch screen monitor controls
- Control card
- Startup and shutdown
- Managing the 3M™ SelfCheck™ System
- Usage reports
- Setup pages
- General maintenance
- Solving problems
- FAQs
- How can I change screen messages?
- Does the 3M™ SelfCheck™ System operate with SIP 1.
- What happens if a customer is not allowed to borrow materials?
- Does the 3M™ SelfCheck™ System follow the library'
- Does the 3M™ SelfCheck™ System do renewals?
- Does the customer need the book for a renewal?
- Does the 3M™ SelfCheck™ System recognize items on
- Will the 3M™ SelfCheck™ System still desensitize i
- What happens if a customer tries to check out a book that is on loan to someone else?
- How can I change the sound volume?
- Boot and Login Problems
- ACS conflicts notification
- Printer problems
- Check-in/checkout problems
- Cannot check out books
- Cannot read magnetic cards
- Cannot read smart cards
- Cannot read the customer or item ID
- Cannot select Mag Card or Smart Card as the customer identifier
- The Media check is not working
- Some customers are not allowed to check out items
- Customers are unable to renew items
- Customers are unable to check out videos
- Customers are unable to check out audio tapes
- Receipt Problems
- Scanner problems
- Power problems
- Messages do not display correctly
- Other Problems
- FAQs
- Obtaining service and supplies
- Appendix A: Email notification messages
- Appendix B: Scanner Adjustment Template
8
Safety information for the V-Series Models 6410, 6420, and 7410
EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS
Attention: Read accompanying
documentation
Risk of electric shock
Display Unit: Mercury disposal
hazard
Laser Scanner: Laser exposure
WARNING
To reduce the risk associated with fire due to modification or incorrect
installation of system components or the use of non-approved replacement
components:
Do not attempt to modify or repair — no user serviceable parts inside — contact
3M Service for repair.
Use approved system components installed by 3M service personnel only.
Install system components into desk or enclosure according to instructions and
specifications given in the appropriate site planning guide.
To reduce the risk associated with hazardous voltage due to a user attempting
to service a component, incorrect installation of system components, or use of
the system when damage has occurred:
Do not attempt to modify or repair — no user serviceable parts inside — contact
3M Service for repair.
Install system components into desk or enclosure according to instructions and
specifications given in the appropriate site planning guide.
Do not use the V-cradle, coil driver box, interconnect box, appliance coupler, or
computer if any cases or power cords are damaged.