User's Manual
Table Of Contents
- V-Series, R-Series, BCS Owner's Manual
- Safety information
- Intended use
- Safety information for V-Series Models 6410, 6420, 7410, and 7420
- Safety information for V-Series Tabletop Models 6412, 6422, 7412, and 7422
- Safety information for R-Series Model 8410
- Safety information for BCS Model 9410
- V-Series label locations
- V-Series Tabletop Unit label locations
- R-Series label locations
- BCS label locations
- Regulatory compliance
- Overview
- Touch screen monitor controls
- General maintenance
- Solving problems
- Obtaining service and supplies
- Appendix A: BCS scanner adjustment template
- Safety information
2 ⎟
EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS
Attention: Read accompanying
documentation
Risk of electric shock
Display Unit: Mercury disposal
hazard
CAUTION
LASER LIGHT
DO NOT STARE INTO BEAM
0.95 mW at 630-670 nm
CLASS 2 LASER PRODUCT
Laser Scanner: Laser exposure
Safety information for V-Series Models 6410, 6420, 7410, and
7420
WARNING
To reduce the risk associated with fire due to modification or incorrect
installation of system components or the use of non-approved replacement
components:
Do not attempt to modify or repair—no user serviceable parts—contact 3M
Service for repair.
Use approved system components installed by 3M service personnel only.
Install system components into desk or enclosure according to instructions and
specifications given in the appropriate site planning guide.
To reduce the risk associated with hazardous voltage due to a user attempting
to service a component, incorrect installation of system components, or use of
the system when damage has occurred:
Do not attempt to modify or repair—no user serviceable parts—contact 3M
Service for repair.
Install system components into desk or enclosure according to instructions and
specifications given in the appropriate site planning guide.
Do not use the V-cradle, coil driver box, interconnect box, appliance coupler, or
computer if any cases or power cords are damaged.