SelfCheck™ System V-Series, R-Series, and BCS Owners Manual 3M Security Systems Division 3M Center, Building 225-4N-14 St.
© 2006 3M. All rights reserved. 3M is a trademark of 3M.
Table of Contents Safety information ............................................................................................... 1 Intended use...............................................................................................................................1 Safety information for the V-Series Models 6410, 6420, and 7410 .......................................3 Safety information for the V-Series Tabletop Models 6412, 6422, 7412, and 7422 .............
Safety information Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M™ SelfCheck™ System V-Series Model 6410, 6420, and 7410, the 3M SelfCheck System V-Series Tabletop Models 6412, 6422, 7412, and 7422, the 3M SelfCheck System R-Series Model 8410, and 3M SelfCheck System BCS Model 9410. Retain these instructions for future reference.
EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS Attention: Read accompanying documentation DANGER High voltage. Power must be disconnected before servicing. Disconnect power before servicing. Unit contains high voltage electrical circuits that must be discharged and checked for voltage prior to servicing. Service should be performed only by 3M factory trained service personnel. Risk of electric shock Display Unit: Mercury disposal hazard CAUTION LASER LIGHT DO NOT STARE INTO BEAM 0.
Safety information for the V-Series Models 6410, 6420, and 7410 ! WARNING To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only.
Safety information for the V-Series Tabletop Models 6412, 6422, 7412, and 7422 ! WARNING To reduce the risk associated with fire due to a user or installer attempting to service the SelfCheck unit: • Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair; • Use approved replacement components, installed by 3M Service personnel only.
Safety information for the R-Series Model 8410 ! WARNING To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only.
Safety information for the BCS Model 9410 ! WARNING To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only. Install system components according to instructions and specifications given in the Model 9410 Site Planning Guide.
V-Series label locations 78-8126-7512-8 100 - 240V~ 50/60 Hz 1A N1108 3 78-8126-7519-3 100 - 240V~ 50/60 Hz 12A MAX LOAD I.T.E. LISTED ACCESSORY 4P24 CAUTION N1108 LASER LIGHT DO NOT STARE INTO BEAM 3 0.95 mW at 630-670 nm CLASS 2 LASER PRODUCT 21 CFR Subchapter J, IEC 60825-1:1997 and EN 60825-1:1996 BACKLIGHT CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE, AND FEDERAL LAWS 78-8126-7875-9 This device complies with part 15 of the FCC Rules.
V-Series Tabletop Unit label locations 78-8126-xxxx-x CAUTION 100 - 240V~ 50/60 Hz 1A LASER LIGHT DO NOT STARE INTO BEAM 0.95 mW at 630-670 nm CLASS 2 LASER PRODUCT N1108 3 21 CFR Subchapter J, IEC 60825-1:1997 and EN 60825-1:1996 78-8126-xxxx-x 100 - 125 / 220 - 240V~ 60/50 Hz 2 /1A DANGER I.T.E. LISTED ACCESSORY 4P24 High voltage. Power must be disconnected before servicing. N1108 3 3M Library Systems St. Paul, Minnesota 55144 This device complies with part 15 of the FCC Rules.
R-Series label locations 78-8126-7512-8 100 - 240V~ 50/60 Hz 1A N1108 3 78-8126-7519-3 100 - 240V~ 50/60 Hz 12A MAX LOAD CAUTION I.T.E. LISTED ACCESSORY 4P24 N1108 LASER LIGHT DO NOT STARE INTO BEAM 3 0.95 mW at 630-670 nm CLASS 2 LASER PRODUCT 21 CFR Subchapter J, IEC 60825-1:1997 and EN 60825-1:1996 BACKLIGHT CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE, AND FEDERAL LAWS This device complies with part 15 of the FCC Rules.
BCS label locations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus also meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Regulatory compliance EMC compliance USA and Canada FCC Radio Frequency Rules and Regulations This equipment has been tested and found to comply with the limits for a Class A device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Overview Welcome to the 3M™ SelfCheck™ System. The SelfCheck system enables library customers to check library materials in and out by themselves. The system emulates the check-in and checkout procedures performed by library staff. In addition, the system can optionally operate in offline mode when the library's automated circulation system is unavailable.
V-Series specifications System physical characteristics (with cabinet) Overall height 58.5 inches (148.6 cm) Counter height 36 inches (91.4 cm) Width 44.5 inches (112.9 cm) Counter depth 26.5 inches (67.4 cm) Base depth 34.5 inches (87.6 cm) Weight Laminate top Corian® top 314 lbs. (142 kg) 334 lbs. (151 kg) Shipping weight Laminate top Corian® top 364 lbs. (165 kg) 384 lbs.
Component Dimensions Weight Electrical Appliance coupler 3.25 in. × 3.0 in. × 32.25 in. (max.) 8.26 cm × 7.62 cm × 81.9 cm 1.24 lb 0.56 kg 100–240 VAC, 12.0 A V-Series Tabletop Unit specifications System physical characteristics Height 31.0 inches (78.7 cm) Width 36.0 inches (91.4 cm) Depth 30.5 inches (77.5 cm) Weight Laminate top Corian® top 200 pounds (90.7 kg) 220 lbs. (99.8 kg) Shipping weight Laminate top Corian® top 250 lbs. (113 kg) 270 lbs.
R-Series specifications System physical characteristics (with cabinet) Overall height 58.5 inches (148.6 cm) Counter height 36 inches (91.4 cm) Width 44.5 inches (112.9 cm) Counter depth 26.5 inches (67.4 cm) Base depth 34.5 inches (87.6 cm) Weight Laminate top Corian® top 278 lbs. (126 kg) 298 lbs. (135 kg) Shipping weight Laminate top Corian® top 328 lbs. (149 kg) 348 lbs.
Component specifications Component Dimensions Weight Electrical Touch screen 16.1 in. × 10.2 in. × 15.7 in. 40.9 cm × 25.9 cm × 39.9 cm 16.3 lb 7.4 kg 12 VDC, 2.0 A Scanner 2.59 in. × 1.38 in. × 3.47 in. 6.58 cm × 3.51 cm × 8.81 cm 7.5 oz 213 g 24 VDC, 300 mA Printer 6.25 in. × 8.5 in. × 5.87 in. 15.9 cm × 21.6 cm × 14.9 cm 4.2 lb 1.9 kg 24 VDC, 3.0 A Interconnect box 12 in. × 12 in. × 3 in. 30.5 cm × 30.5 cm × 7.62 cm 3.6 lb 1.6 kg 100–240 VAC, 1.0 A Computer without stand 13.3 in.
Components V-Series The SelfCheck System V-Series models consist of the following components: (1) Color touch screen monitor (2) Magnetic card reader (optional) (3) Barcode scanner (4) Smart card reader (optional) (5) Receipt printer (6) V-cradle (7) Interconnect box (inside furniture) (8) V-coil driver box (inside furniture) (9) Appliance coupler (inside furniture) (10) Computer with keyboard and mouse (inside furniture) 1 3 2 6 4 5 7 8 10 9 3M™ SelfCheck™ System V-Series components V-Series Tablet
R-Series The SelfCheck System R-Series models consist of the following components: (1) Color touch screen monitor (2) Magnetic card reader (optional) (3) Barcode scanner (behind monitor) (4) Smart card reader (optional) (5) Receipt printer (6) RFID pad (7) Interconnect box (inside furniture) (8) Appliance coupler (inside furniture) (9) Computer with keyboard and mouse (inside furniture) 1 3 2 6 4 5 7 8 9 8410_UG_02 3M™ SelfCheck™ System R-Series components BCS Model 9410 The SelfCheck System BCS mode
WARNING To reduce the risk associated with hazardous voltage due to a user attempting to service a component, incorrect installation of system components, or use of the system when damage has occurred: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Install system components into desk or enclosure according to instructions and specifications given in the appropriate site planning Guide.
Workstation or 3M™ Conversion Station. The SelfCheck system uses the information in the RFID tag to check materials in and out. It also turns on a security feature in the tag when it checks items in, and turns it off when it checks items out. Using RFID, several items can be processed at one time. For more information about RFID technology, see http://www.3m.com/us/library. Interconnect box The interconnect box is installed inside SelfCheck system furniture.
CAUTION To reduce the risk associated with environmental contamination due to the incorrect disposal of the lithium battery in the PC, mercury in the monitor/ display, and/or any circuitry that contains lead in the solder: At the end of service life, dispose of the V-cradle, coil driver box, interconnect box, appliance coupler, computer, monitor, and laser scanner in accordance with federal, state, and local requirements.
Touch screen monitor controls The SelfCheck system uses a touch screen monitor to guide customers through check-in and checkout. To adjust the display, use the monitor’s onscreen menu to adjust display characteristics, such as brightness, contrast, and color. Do not change the display resolution, for the default resolution is optimized for the SelfCheck system graphics. To adjust the display 1 Press the menu key to display the main menu. 2 Using the selection keys, make adjustments as required.
23
