User's Manual

11
Loading the tag dispenser with tags
1 Open the Conversion Station cabinet doors and locate the tag dispenser.
2 Locate the supply role shaft.
3 Rotate the supply roll shaft until it is
in the up position.
4 Release the stop lever so that it
drops into a horizontal position.
812_FSH_001
On
Off
Jog
5 Remove the two plastic core inserts
from the supply role shaft and install
one on each side of the roll of RFID
tags.
812_FSH_004
6 Remove the tape from the roll of
RFID tags.
812_FSH_005
T
ape
7 Install the roll of tags on the supply
role shaft and thread the tags
through the unit to the take-up
spool.
On
Off
Jog
812_FSH_002