User's Manual
Table Of Contents
- C-Series User Guide
- Safety information
- Regulatory compliance
- Overview
- Software installation
- Typical workflows
- Startup and shutdown
- Installing system security updates
- Managing the 3M™ SelfCheck™ System
- Home page
- Basic administration
- Advanced administration
- General maintenance
- Solving problems
- Obtaining service and supplies
- Appendix A: Email notification messages
⎟ 5
Software installation
If the SelfCheck system computer is supplied by 3M, the SelfCheck system
software should already be installed. If you should need to install or reinstall
the SelfCheck system software yourself, please follow these instructions.
Step 1 – Install the Windows XP System Configuration Update
The system configuration update makes the following changes to the
SelfCheck system’s computer:
Turns off services that are not being used.
Installs additional drivers.
Installs a standard password for use by service technicians.
Installs Windows XP Service Pack 2 if required.
Adds the ability to download and install future security updates from a
3M server.
To install the configuration update
1 Verify that the mouse and keyboard are con-
nected to the computer and ready to use.
2 Turn on the computer and wait for all
programs and services to finish loading.
3 Disable the Windows screen saver.
4 Insert the 3M Windows XP System
Configuration CD into the CD drive.
5 Wait for a message asking if you want to
proceed.
6 Click Yes.
Click Yes to proceed
A 3M Update Status message appears,
after which the computer restarts.
During the upgrade, the computer reboots a
total of eight times. The message appears
after each restart.
3M Update Status message