User's Manual

⎟ 7
4 Click Install from a list or specific location
5 Click Include this location in the search, browse
to the PRINTER\Ithaca\iTherm280\USBport folder
on the CD, and then click Next.
6 Click Finish.
This only causes a USB port to be installed on
your machine. The printer is not installed yet!
5 Browse to PRINTER\Ithaca\iTherm280\USBport
7 When the Found New Hardware Wizard
reappears, again click Install from a list or
specific location, and then click Next.
8 Click Include this location in the search, browse
to the PRINTER\ Ithaca\iTherm280\Drivers folder
on the CD, and then click Next.
9 Click Finish.
10 Restart the computer when prompted.
11 When the computer restarts, cancel the installation
program, but leave the CD in the CD drive.
8 Browse to PRINTER\Ithaca\iTherm280\Drivers
Install the printer driver
1 Click Start, click Settings, click Printers and
Faxes, and then double-click Add Printer.
2 Click Next.
3 Select Local Printer attached to this computer,
and then clear the check box for Automatically
detect and install my Plug and Play printer.
4 Click Next.
5 In the Use the following port box, select USBxxx
(Virtual printer port for USB), and then click Next.
6 In the Install Printer Software dialog box, click
Have Disk.
5 Select the USB port