User's Manual

⎟ 15
Local interface
The local interface is available only on the SelfCheck system computer. You
can use it to monitor the operation of the SelfCheck system, reset the chute
counter, and view reports.
Common elements
The local interface has the following common
elements:
(1) Close button. Closes the SelfCheck
system window only. The SelfCheck
system software continues to run in the
background.
(2) Tabs. Click to select different interface
pages.
(3) Status view. Displays messages about
the operation of the SelfCheck system.
Local interface
Current Items tab
Use the Current Items tab to view current
item statistics, to reset the current statistics,
and to forward stored items to the circulation
system.
View Item Report
Displays the current item statistics. (See
“
Item reports” on page 17.)
View Exception Report
Displays the current exception statistics.
(See “
Exception reports” on page 18.)
Forward Stored Items
Current Items tab
Forwards stored item transactions to the circulation system. You can also for-
ward stored transactions from SelfCheck System Manager. (See “
Forwarding
stored items” on page
51.) The local interface only forwards items that have
been stored since the last time the items were removed. It is best to use it
only when the circulation system loses connectivity for a brief time.
Items Removed
Archives the current item statistics and resets the count to zero. You should
click this button each time you empty the chute.