User's Manual
Table Of Contents
- C-Series User Guide
- Safety information
- Regulatory compliance
- Overview
- Software installation
- Typical workflows
- Startup and shutdown
- Installing system security updates
- Managing the 3M™ SelfCheck™ System
- Home page
- Basic administration
- Advanced administration
- General maintenance
- Solving problems
- Obtaining service and supplies
- Appendix A: Email notification messages
20 ⎟
3M™ SelfCheck™ System Manager
SelfCheck System Manager is the SelfCheck system’s Web-based
management and configuration utility. Access to its features is password-
protected. Only administrators with advanced passwords have complete
access to its configuration options.
Because SelfCheck System Manager is Web-based, you can open it from
any computer equipped with a Web browser, including the SelfCheck system
computer itself.
To open SelfCheck System Manager at the SelfCheck system
1 Start Internet Explorer, which opens at the SelfCheck system’s Home
page.
2 In the Password box, type your password, and then click Login.
To find the SelfCheck system’s IP address
1 Open SelfCheck System Manager at the SelfCheck system. (See the
preceding procedure.)
2 Note the address under Machine host name or ip address on the left
side of the screen.
To open SelfCheck System Manager remotely
1 Open your computer’s Web browser.
2 In the browser’s address box, type the address of the SelfCheck system
you want to manage, in the format http://ipaddress/admin/, where
ipaddress is the IP address or URL of the SelfCheck system.
3 Press ENTER.
4 On the SelfCheck system’s Home page, type your password in the
Password box, and then click Login.
For quick access, bookmark each SelfCheck system in your browser.
SelfCheck system address