User's Manual

34 ⎟
Self Check C-Series Error
Sends an email notification any time a critical error or failure condition
occurs: for example, RFID reader failure, printer out of paper, etc. An
additional notification is sent when the failure condition clears.
Printing hold slips
Selecting hold slips for printing
Each type of hold listed in the Exceptions tab can be
selected for printing in the Printouts tab.
To enable printing of hold slips
1 In the Printouts tab, select the printer that you
want the hold slips to be printed on, and then click
Save Hold Slip Printer. The printer must also be
enabled on the Devices tab.
2 Select the hold slips you want to be able to print.
3 Clear the check boxes of hold slips you do not
want printed.
4 Click Save Hold Slips.
Select Print Hold Slips when they occur to print each
hold slip at the time the item is processed. Alternatively,
you can print hold slips for any chute at a later time by
clicking Print Hold Slips in the chute exception report.
Printouts tab
Configuring hold slips
You can configure the format of the hold slips by clicking
Configure Hold Slip in the Hold Slips area of the
Printouts tab.
Selecting the information to print
In the Select information to print area, select the
information you want printed on the hold slip, and then
click Save Selections. The date that the item was
checked in and title of the item are always printed.
Item ID
The item’s ID code.
Customer name
The name of the customer who the hold is for.
Customer ID
The customer’s ID code after it is converted by the ID
filter. To print only part of the code, in the Leftmost
characters to hide box, type the number of characters
you want to hide. Hidden characters print as asterisks.
Destination Location
The location code of the item’s destination.
Hold slips configuration