User's Manual

Table Of Contents

⎟ 37

Keep alive interval

The time between messages periodically sent from the SelfCheck system to

the circulation system to maintain communications.

Character set

The character set that the SIP communication parameters are coded in by

the circulation system.

Set new terminal password

Enables a change in the terminal password. Select before typing a new

terminal password.

Terminal password

The appropriate ID for your socket connection. If you are using a login

message instead of a login script, you might need to identify your terminal ID

for the circulation system. The circulation system may use this to determine if

the access is coming from the right place. The circulation administrator

should have this information.

Host communications

Communication type

Choose the communication method for connecting to the

host. If you choose Telnet, you must create a login script

in the Send/Expect Scripts section.

TCP port

The port number used for communications.

Host address

The DNS name or IP address of the host.

Network Host Communications section

If your circulation system requires a SIP login, use this

section to define the login message.

Select if a login is required; clear the check box if it is not.

The user ID, obtained from the circulation system

administrator.

Set new login password

Enables a change in the login password. Select before

typing a new login password.

Network Login Message section

The user password, obtained from the circulation system administrator.

Location code

This box optionally allows the circulation system to identify the location of the

SelfCheck system or to encode other types of information. The text or

numbers you place in this box are sent to the circulation system only when

the login command is used.