User's Manual

52 ⎟
Setting Offline mode
When you learn that the circulation system will be unavailable for an extended
period of time, you should set the SelfCheck system to Offline mode.
To set the SelfCheck system to Offline mode
1 Open SelfCheck System Manager, log in, and then click the
Support tab.
2 Click the Operation Mode box, click Offline, and then click
Set Mode.
Setting Offline mode
Forwarding stored transactions
The SelfCheck system automatically detects when the circulation system is
back online. As soon as it is back on line, you should forward the stored
transactions to the circulation system.
To forward stored transactions
1 Make sure the SelfCheck system is in Normal mode.
2 On the Store & Forward tab, under Queue, verify that the number of
stored items is greater than 0.
3 Click Start Forwarding. If there are no items to forward, Start
Forwarding is unavailable.
When forwarding is complete, refresh the page to make sure that all
unprocessed items have been successfully forwarded.
You can also forward stored transactions from the local interface. (See
“
Current Items tab” on page 15.) The local interface only forwards items
that have been stored since the last time the items were removed. It is
best to use it only when the circulation system loses connectivity for a
brief time.
Unprocessed items
Stored transactions are listed in the Unprocessed
Items table until they have been forwarded. You
can export this list as an XML file. You can also
delete the list.
To export the list of unprocessed items
1 In the Unprocessed Items menu, click the
export icon (
).
2 In the File Download dialog box, click Save.
3 In the Save As dialog box, type a name for the
file, and then click Save.
Unprocessed items list
To delete the list of unprocessed items
1 In the Unprocessed Items menu, click the delete all icon ( ).
2 In the confirmation message, click OK.