User's Manual

10
Setting the audible alarm and display intensity
The duration and repetition rate of the audible alarm and the intensity of the
display is set up during installation.
Cleaning instructions
Panel and base
Turn off the security system prior to using liquid cleaners. Remove dirt and
greasy buildup using towels or soft cloths that have been dampened with a
common household grease-cutting liquid cleaner. 3M suggests a monthly
cleaning to retain the best equipment appearance.
Photocell lens and reflector
At least once a month, wipe the photocell lens and reflector with a soft cloth
dampened with water.
WARNING
To reduce the risks associated with hazardous voltage:
§ Do not use the product if the case, covers, or power cord are damaged;
§ Do not attempt to modify, service, or repair no user serviceable parts inside contact 3M
Service for repair.
CAUTION
To reduce the risks associated with environmental contamination from circuit boards
containing lead-bearing solder:
§ At the end of service life, dispose of the product according to federal, state and local
requirements.