User's Manual
Table Of Contents
- Safety Information
- Intended use
- Explanation of signal word consequences
- Explanation of product safety label symbols
- Warnings
- Cautions
- Japan
- Label locations (Model 942 and 943)
- Label locations (Model 946)
- EMC compliance USA and Canada
- Introduction
- Using the Model 942
- Using the Model 943 and Model 946
- Troubleshooting
- Service telephone numbers
20
Checking items out
Use this procedure to checkout items.Do NOT use it with magnetic media. To
process magnetic media, see
Sending item IDs to the circulation system
on page
21.
1 Choose Checkout, using any of the following methods:
Hotkeys (See the administrator if you need to know
which keys have been configured as hotkeys.)
Checkout button on the menu
Check-in/Checkout button on the Book Check unit (the
checkout light should be lit)
940_UG_012
2 Place the patron’s library card over the Book Check
sensor and under the scan line.
3 At the prompt, remove the library card.
940_UG_014
Patron
Card
4 Place the item on the Book Check, ensuring that the item
is positioned:
Over the active sensors
With the security strip near the back of the deck of the
Book Check.
So that the barcode is under the scan line.
940_UG_013
Security
strip here
5 If you are prompted to select a target application, select
the circulation system application and then click OK.
6 Follow the prompts to complete the transaction.