User's Manual
Table Of Contents
- Safety Information
- Intended use
- Explanation of signal word consequences
- Explanation of product safety label symbols
- Warnings
- Cautions
- Japan
- Label locations (Model 942 and 943)
- Label locations (Model 946)
- EMC compliance USA and Canada
- Introduction
- Using the Model 942
- Using the Model 943 and Model 946
- Troubleshooting
- Service telephone numbers
22
4 Place the item on the Book Check, ensuring that the
item is positioned:
Over the active sensors
So that the barcode is under the scan line.
940_UG_018
5 If you are prompted to select a target application,
select the circulation system application and then
click OK.
6 Follow the prompts to complete the transaction.
Securing and unsecuring items
Use this procedure to secure or un-secure an item without communicating
with the ILS.
1 Choose Secure only or Un-secure only from the
Operations menu.
2 Place the item on the Book Check, ensuring that the
item is positioned:
Over the active sensors
With the security strip near the back of the deck
of the Book Check.
So that the barcode is under the scan line.
940_UG_013
Security
strip here
3 When you here the “thump,” remove the item.