User's Manual
Table Of Contents
- Safety Information
- Intended use
- Explanation of signal word consequences
- Explanation of product safety label symbols
- Warnings
- Cautions
- Japan
- Label locations (Model 942 and 943)
- Label locations (Model 946)
- EMC compliance USA and Canada
- Introduction
- Using the Model 942
- Using the Model 943 and Model 946
- Troubleshooting
- Service telephone numbers
6
Disposal hazard
Warnings
WARNING
To reduce the risk associated with fire or hazardous voltage due to a user or
contractor/installer attempting to service or modify the book check unit:
Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair.
To reduce the risk associated with fire or hazardous voltage due to the incorrect installation
of book check system components by the user or contractor/installer:
Install system components into desk or enclosure in accordance with instructions and
specifications given in the 3M Book Check Model 940 Series Site Planning and Installation
Guide.
To reduce the risk associated with fire due to incorrect installation of service parts or use of
non-approved replacement components:
Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair;
Use approved system components, installed by 3M Service personnel only.
To reduce the risk associated with hazardous voltage due to the incorrect installation of book
check system components by the user or contractor/installer, or use of the system when
damage has occurred:
Install system components into desk or enclosure in accordance with instructions and
specifications given in the 3M Book Check Model 940 Series Site Planning and Installation
Guide;
Do not use the book check system if damage has occurred to enclosure or power cord.
To reduce the risk associated with back strain due to the weight of the book check unit:
The book check unit weighs more than 20 pounds — use proper lifting procedures.
To reduce the risk associated with tipping or falling of the book check unit:
Install system components into desk or enclosure in accordance with instructions and
specifications given in the 3M Book Check Model 940 Series Site Planning and Installation
Guide.