User's Manual

2 -MiY Devices  10
Proprietary
2.2.8 USB Ports
The MiY device has two (2) USB ports that are configurable. The device has a USB host port and
OTG USB client port.
2.2.8.1 USB Host Port
The USB host port is only accessible from the back panel of the device. The USB host port is
used to integrate additional USB components to the device, such as a camera, by adding a
driver for the component to the firmware and updating GateApp’s to use the new component.
2.2.8.2 OTG USB Port
The OTG USB client port is located on the bottom of the device and is disabled by default. An
administrator must login to the device menu to enable the OTG port for Normal or Development
use.
Normal OTG mode allows for communication between the device and the Device Admin Utility
running on a PC or laptop that has the MiY Device Driver installed. The Development mode is
designed for use by developers that need the device to communicate with their PC or laptop via
Microsoft ActiveSync or Windows Mobile Device Center.
For instructions on enabling the OTG USB port, see the section Enabling the OTG USB Port in
this document