User's Manual

8 -Verifying Users for Access/Entry  58
Proprietary
Verification Type Screen Displayed Instructions
PIN
(Personal
Identification
Number)
When prompted by the device, use the
number pad on the device to enter the
appropriate PIN.
Upon successful PIN verification, the
device will display the next screen in the
verification workflow.
Card*
*Only available on
MiY-Card
When prompted by the device with the
top screen, place the appropriate card
on the reader located on top of the
device. This area will be indicated by
blue flashing LEDs. Do not remove the
card from the reader.
While the bottom screen is displayed,
keep the card on the reader.
Upon successful card verification, the
device will display the next screen in the
verification workflow.
Multi-Mode
Verification*
*Only available on
MiY-Card
When this screen is displayed, it
indicates that the device is in multi-
mode.
Presenting a card, finger, or Panel ID will
initiate a multi-step workflow for
verification.
Success
Upon successful user verification, this
screen will be displayed on the device.
The device will then perform the action
programmed for a verification event
(e.g. unlock the door).