User's Manual

3M Confidential DRAFT Travel Document Reader User Guide
DT-01715C © 3M 2006 All rights reserved.
19
Figure 23: Document Placement
Maintenance
The reader must be cleaned on a regular basis. For extensive repairs, return the reader to 3M. See
Return to Depot - Maintenance Procedure on page 28 for more information.
Cleaning
Clean the reader regularly to ensure proper performance.
Note: Use a safe cloth that will not damage glass, such as the Scotch-Brite™ Microfiber
Cleaning Cloth (provided). To reorder cleaning cloths (G-00037), contact GTS.
See Appendix D: Customer Service on page 27 for more information.
1.
Unplug the reader.
2.
Clean the document window with a clean cloth. For stubborn dirt, use a mild glass
cleaner or a lightly dampened cloth (water).
Note: Avoid using abrasive cleaners that may scratch the glass.
3.
Verify that there are no streaks or smudge spots remaining on the document window.
4.
Clean the body of the reader with a lightly dampened cloth (water).
5.
Plug in the reader and turn on the power switch.
6.
Verify that the power-up self test performs correctly.
For more information, see Power-up Self Test on page 14.
Ultraviolet Tube Replacement
The UV tubes must be replaced after approximately 8000 hours of use.
Contact your GTS representative for detailed instructions.