User's Manual

3M Confidential DRAFT Travel Document Reader User Guide
DT-01715C © 3M 2006 All rights reserved.
25
Appendix C: Check for High Speed USB 2.0
The reader is a USB 2.0 device and requires Microsoft® Windows® 2000-SP4 or Windows®
XP.
Note: The reader will not function in a USB1.1 environment. Make sure a commercially-
available USB 2.0 card is installed in your PC. For problems with your operating system,
consult with your local IT representative. For other problems contact GTS. For
information, see Before Contacting GTS on page 27.
Windows® 2000
1. In Windows® 2000, right-click My Computer and select Properties.
Figure 25: System Properties window
2. Locate the version number on the General tab and verify that Service Pack 4 or greater
has been installed.
3.
Right-click My Computer and select Manage.
4.
Click on Device Manager in the Tree list.
5.
Under Universal Serial Bus controllers locate USB 2.0 Root Hub.