3 ST* Connectors and Accessories 1
The 3M™ ST* Connector product line provides high repeatability and low light loss for premises, LAN and telco applications. The improved connector design is compatible with the AT&T ST* connector product line as well as Systimax* components and other ST* connector products. The 3M products are supplied with a high quality PC finish on zirconia ceramic ferrules.
ST* Connector, Epoxy Bayonet Multimode/ Single-mode The Epoxy ST* Connector is bayonet style for quick interconnect and high repeatability.
Connector Accessories Couplings 3M Couplings are compatible with Hot Melt, Bayonet, and Crimplok™ connectors and cable assemblies from 3M, as well as other major ST* connector vendors. These singlemode and multimode couplings are available in threaded or simplex housings, and a duplex coupling with 0.5" industry standard spacing. The duplex threaded coupling is mounted on the panel with a single nut and provides high density capability.
Ordering Information Product Name Multimode Connectors 6100-W Hot Melt Bayonet ST* Connector MM, 125 um, white boot 6100-R Hot Melt Bayonet ST* Connector MM, red boot 6100-B Hot Melt Bayonet ST* Connector MM, black boot 6105-B Bayonet ST* Connector MM, 125 um Epoxy, black boot 6901 Crimplok™ MM ST* Connector 6100-W5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, white boot 6100-R5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, red boot 6100-B5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, black
* ST is a registered trademark of AT&T. * Systimax is a registered trademark of AT&T. * Estane is a registered trademark of Goodyear. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase.
