Brochure

ManualsBrands3M ManualsMaintenanceSafety-Walk Slip Resistant General Purpose Tape, 51mm x 18.3m, Transparent

™

Safety-Walk

™

Slip-Resistant Materials

Product Descriptions:

™

Safety-Walk

™

Coarse Tapes and Treads −

700 Series

The product consists of large abrasive

particles bonded by a tough, durable

polymer to a dimensionally stable plastic

film. The reverse side is coated with a

pressure-sensitive adhesive covered by

a removable protective liner.

Standard sizes:

Refer to Standard Product Chart (Page 2)

Colors: Black #710, Gray #770

Custom sizes: Available upon request

™

Safety-Walk

™

Slip-Resistant General

Purpose Tapes and Treads −

600 Series

The product consists of abrasive particles

bonded by a tough, durable polymer to a

dimensionally stable plastic film. The

reverse side is coated with a pressure-

sensitive adhesive covered by a removable

protective liner.

Standard sizes:

Refer to Standard Product Chart (Page 2)

Colors: Black #610, Clear #620, and

Safety Yellow #630

Custom sizes: Available upon request

™

Safety-Walk

™

Slip-Resistant Conformable

Tapes and Treads −

500 Series

The product consists of abrasive particles

bonded by a tough, durable polymer to

aluminum foil. The reverse side is coated

with a pressure-sensitive adhesive covered

by a removable protective liner. The product

is designed to stretch and conform to

irregular surfaces such as diamond plating

or flat surfaces with rivets or screw heads,

ladder rungs, etc.

Standard sizes:

Refer to Standard Product Chart (Page 2)

Colors: Black #510 and Safety Yellow #530

Custom sizes: Available upon request

™

Safety-Walk

™

Slip-Resistant Medium

Resilient Tapes and Treads −

300 Series

The product consists of dimensionally stable

plastic film coated with a textured resilient

surface. The reverse side is coated with a

pressure-sensitive adhesive covered by a

removable protective liner.

Standard sizes:

Refer to Standard Product Chart (Page 2)

Colors: Black #310 and Gray #370

Custom sizes and colors:

Available upon request

™

Safety-Walk

™

Slip-Resistant Fine Resilient

Tapes and Treads −

200 Series

The product consists of a fine textured

resilient top surface. The reverse side is

coated with a pressure-sensitive adhesive

covered by a removable protective liner.

Standard sizes:

Refer to Standard Product Chart (Page 2)

Colors: White #280 and Clear #220

Accessories:

™

Safety-Walk

™

Primer

Primer is a solvent-based

adhesive. It is to be applied to

rough or porous surfaces before

application of adhesive-backed

products. One quart covers

approximately 35 square feet.

Size: 1 quart can

™

Safety-Walk

™

Edge Sealing

Compound

Edge Sealing Compound is a liquid,

solvent-based sealer in a convenient

tube applicator. The product seals

the exposed edges of Safety-Walk

slip-resistant materials, providing

extra protection from excessive

moisture or liquids. One five-ounce

tube seals approximately 75 to 100

linear feet.

Size: 5 oz. tube

™

Safety-Walk

™

Rubber Hand Roller

Rubber Hand Roller helps

provide a firm bond when

Safety-Walk slip-resistant

materials are applied.

Size:

Roller – 1 ⅜" diameter x 2" wide

Overall length – 6"

Technical Data/

Product Specification

July 2011

Summary of content (7 pages)

PAGE 1
3M™ Safety-Walk™ Slip-Resistant Materials Technical Data/ Product Specification July 2011 Product Descriptions: 3M™ Safety-Walk™ Coarse Tapes and Treads − 700 Series The product consists of large abrasive particles bonded by a tough, durable polymer to a dimensionally stable plastic film. The reverse side is coated with a pressure-sensitive adhesive covered by a removable protective liner.
PAGE 2
Standard Product Chart 3M™ Safety-Walk™ Slip-Resistant Tapes and Treads Standard Sizes and Colors Coarse 700 Series Size ¾" x 24" Black* #710 Gray #770 5 ½" x 5 ½" General Purpose 600 Series Black #610 X Safety Yellow #630 Clear #620 Black #510 Safety Yellow #530 Medium Resilient 300 Series Black #310 Fine Resilient 200 Series Gray #370 White #280 Clear #220 X X X X X X 6" x 24" X 4" x 30' X 6" x 30' X 24" x 30' X X X X X ¾" x 60' X 1" x 60' X X X 2" x 60' X X X X
PAGE 3
Product Selection Guide Type of 3M™ Safety-Walk™ Slip-Resistant Tapes and Treads Applications Farm Machinery Construction equipment Forklifts Cherry pickers Steps, stairs, and platforms Recreational vehicles Snowmobiles ATVs Garden tractors Lawn mowers Wet & oily areas Loading docks Cold storage Catwalks Platforms/ramps Ladders Step stools Scaffolds Airplane decks/cargo holds Trains Semi-trailers Buses Ships decks Water skis Surf boards Jet skis Boats Swimming pools Pool accessories Diving boards Bath area
PAGE 4
Typical Properties Type of 3M™ Safety-Walk™ Slip-Resistant Tapes and Treads Coarse 700 Series Color Applied Thickness (in.) (mm) Applied Weight (oz.) ft.
PAGE 5
Chemical Resistance Use this guide to help select the proper 3M™ Safety-Walk™ Slip-Resistant Tapes and Treads when exposure to chemicals is anticipated. Recommendations are based on samples bonded to stainless steel after seven days immersion.   Fine Resilient Material in Clear may turn cloudy during continuous immersion in water. It will regain clarity after it dries. Colors may be affected by exposure to some chemicals.
PAGE 6
Directions for use: Surface Preparation Instructions: 6. 1. 7. Make sure surface is clean, dry, smooth and above minimum application temperature when applying 3M™ Safety-Walk™ Slip-Resistant material. Repair or replace any broken or damaged surface. Minimum application temperatures: Coarse General Purpose Medium Resilient Conformable 40ºF (4ºC) Fine Resilient 50ºF (10ºC) 2. 3. 4. 5. Remove chipped, cracked or peeled paint prior to applying Safety-Walk material. Remove loose residue from surface.
PAGE 7
Important Notice to Purchaser Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the performance and useful life of 3M™ Safety-Walk™ Slip-Resistant Tapes and Treads products, including the type and preparation of the surface, and the conditions of use. User is solely responsible for evaluating the product and determining whether it is fit for user’s particular purpose and adequately maintained.