Datasheet

DATA SHEET
ScotchCode Write–On Wire Marker
Dispensers and Marking Pens
Application:
Fast, convenient write–on wire marker for marking wire and
cable (with a O.D. of 0.9 to 1.32 inches) , while providing a
self–laminating protective shield over the legend.
Tape Technical Data:
(All Values are Typical Values)
Material Transparent vinyl film with
acrylic pressure sensitive
adhesive
Application Temperature 50°F to 120°F
Range (10°C to 49°C)
Operating Temperature –40°F to 176°F
Range (–40°C to 80°C)
Storage Temperature 70°F (21°C)
Tape Thickness 3.5 mils (0,10mm)
Adhesion to Steel 35 oz./inch width
(ASTM D–1000) (383 Newtons/meters)
Adhesion to Backing 40 oz./inch width
( at 23°C) (438 Newton/meters)
Tensile Strength 11 lbs./inch width
Engineering Specification:
A vinyl film with acrylic pressure–sensitive adhesive that
provides a self–laminating, protective shield over the legend.
Each roll of marking tape shall be placed in a reenterable
dispenser for use with a permanent marking pen. Markers
shall be manufactured by 3M.
L
W
H
Marker
DescriptionProduct No.
Replacement Pens
Black, PenSMP
Red, PenSMP–R
Product
No. of Labels
per Roll
Write–on
Area W x L
inches
(mm)
Marker Size
W x L
inches
(mm)
Recommended
Wire O.D.
inches
(mm)
Recommended
Wire Size
AWG
(mm
2
)
SWD 250
0.75 x 0.312
(19,0 x 7,9)
0.75 x 1.375
(19,0 x 34,9)
0.09 to 0.31
(2,3 to 7,9)
12 to 2
(4 to 35)
SLW 70
1.0 x 0.75
(25,4 x 19,0)
1.0 x 5.0
(25,4 x 127,0)
0.23 to 1.32
(5,8 to 33,5)
4 to 1000
(22 to 500)
SLS 170
1.0 x 0.5
(25,4 x 12,7)
1.0 x 2.125
(25,4 x 54,0)
0.15 to 0.49
(3,8 to 12,4)
6 to 3/0
(8 to 95)