User manual

43
Maintenance (continued)
• To reduce the risk associated with
mechanical and electrical hazards:
− Turn electrical and air supply off
and disconnect before performing any
adjustments, maintenance or servicing
the machine or taping heads
• To reduce the risk associated with
impact hazards:
− Always use appropriate supporting
means when working under the upper
drive assembly
WARNING
800rf-NA
2012 March
Figure 13-4
Figure 13-5
Figure 13-6
Figure 13-7
Off
13.11 Side Drive Belts Replacement
Operator - Skill Level 2.
Note: in order to convey the case correctly, it is nec-
essary that both belts have the same level of wear.
Remove the plug from the mains and turn the air off
Disconnect the plug from the socket.
Loosen and remove the bolts that fi x the connecting
rod to the side fl ap folder.
Remove the side drives locking screws.
Remove the side drive and place it on a working table.
Figure 13-8