User's Manual

3M™ CR5400 Double-sided ID1 Reader User Guide Introduction
Page 3 of 32
Preface
This user guide describes the features and functions of the 3M CR5400 Double-sided ID1 Reader
(CR54-xx-xx-xx-xx).
Revision History
Version
Date
Description
A Oct., 2014 First Release
A2 March 2015 Added RF and EMC compliance statements
Electromagnetic Compatibility (EMC)
The Products are designed to be immune to levels of interference generated within an office environment
and not to interfere with other equipment. In order to provide this level of compatibility the Product, its
cabling and PSU or its installations, must not be modified in any way.
For further regulatory information or copies of certificates contact your local 3M representative or the
manufacturer at [e-mail]
EMC Compliance Europe
The Product meets the following European Council Directives:
• Scanner: EMC (2004/108/EC), RFID Option RE&TTE (1999/5/EC)
• PSU: EMC (2004/108/EC), LVD (2006/95/EC)
FCC/Canada Radio Frequency Rules and Regulations
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his/her own expense.
NO MODIFICATIONS. Modifications to this device shall not be made without the written consent of 3M
Company. Unauthorized modifications may void the authority granted under Federal Communications
Commission Rules permitting the operation of this device.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC ID: DGFTSSD5400