User's Manual

3M™ CR5400 Double-sided ID1 Reader User Guide Introduction
Page 5 of 32
Important Safety Information
This manual contains important information regarding the operation of the 3M CR5400 Double-sided ID1
Reader. For the safe and reliable operation of the readers, all users must ensure that they are familiar
with and fully understand all instructions contained herein.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation which, if not avoided, could result in injury or
equipment damage.
Indicates a situation which, if not avoided, could result in equipment damage.
Note:
Provides additional important information.
To reduce the risk associated with hazardous voltage which, if not avoided, could result in
death or serious injury:
• Do not use the reader with any AC power supply other than the provided 3M AC power
supply.
• Do not use AC power supply and/or power cord if damaged.
• Do not open the reader and/or power supply. Reader is to be serviced by trained
personnel only. No user serviceable parts or adjustments inside.
• Do not modify or attempt to modify the reader and/or AC power supply.
• Use only in an indoor dry location. Do not use the product in an outdoor and/or wet
environment.
To reduce the risks associated with environmental contamination which, if not avoided, could
result in minor or moderate injury:
• Dispose of electronic waste in accordance with all applicable regulations.
• Modifications or changes to the Product, the interface cables or the power supply not
expressly approved by the manufacturer could void the User's authority to operate the
Product and/or break local laws or regulations.