User's Manual

Issue Date: 12/4/2012
41
Accessing the Officer Menu
To access the Officer Menu from a 2 Piece (XT), follow the button sequence below:
BUTTON SEQUENCE: 2, 2, 1, 1, 2, 1, 2, 2, 3
Messages: Displays messages sent to the device.
Vibrate/Beep: Changes 2 Piece (XT) alert mode.
ID Numbers: Displays ID numbers of assigned hardware.
Alarm Set: Accesses alarm clock function.
Call List: Displays the phone numbers that the 2 Piece (XT) can dial.
Icon Glossary: Displays the icons that appear when the 2 Piece (XT) is in violation. They are programmed
by the officer in the EM Manager (Smart View) software.
Phone # Prefix: Changes dialing prefix for Base Unit 2000 calls.
Beep Volume: Changes volume of alert tone.
Time Format: Changes the way the time is displayed.
Firmware Ver.: Displays current version of software in 2 Piece (XT).
Bracelet Test: Displays the receipt of the signal from the bracelet.
Set Brac S/N: Allows you to temporarily assign a bracelet to an unassigned 2 Piece (XT).
Modem Info: Allows you to force the device to call 3M Electronic Monitoring immediately.
Assigned SBs: Shows you the Base Unit 2000 that is assigned to the offender.
Satellite Bar: Displays the receipt of GPS signals from the GPS satellites.