User's Manual

1.0 Introduction
Prior to bracket installation, the Diebold MMD Cassette must be modified to
accept the Octopus ATM Defense System. The procedure includes trimming
and cutting several existing cassette components.
2.0 Shorten Guide Rails
Top, currency guide rails must be trimmed to provide 70mm clearance
between the rail and the inside front of the cassette (A) Figure 1. Measure
70mm, mark rails and cut rails and black inserts. Reinstall Rails.
3.0 Adhesive
Place a small amount of silicone adhesive between the edge of the rails, the
cassette top, and the black insert (B) Figure 2.
4.0 Remove Guide Rail Supports
Grind the two Rail Guide Supports flush with the Cassette top ( C) Figure 2.
C
70mm (A) B
Figure 1
Figure 2
Page E3Octopus ATM Defense System
Installation and Operation Guide