User's Manual

1.0 Introduction
Prior to bracket installation, the DeLaRue NMD Cassette must be modified to
accept the Octopus ATM Defense System. The procedure includes trimming
and cutting several existing cassette components.
2.0 Modify Guide Rails
Mark both aluminum guide rails at the edge of the plastic supports as shown
in Figure 1.
Remove the two aluminum currency guide rails and positioning springs and
cut off the forward portion of the rails as marked in Figure 1.
Make an inset in the inside, front edge of the cut rails as shown 33 mm from
the rear of the aluminum and 28 mm from the INSIDE edge as shown in
Figure 2.
Figure 1
Figure 2
REMOVE
REMOVE
Octopus ATM Defense System
Installation and Operation Guide
Page H3