User's Manual

Page 2 of 8
INFORMATION TO THE USER
Tools Required
The following tools(not included in the installation kit) may be required to install the Octopus ATM Defense system:
•Hand Grinder (Dremel™ Type) with cutoff saw, rotary file and ground burs.
•Common Screwdrivers
•Phillips Screwdrivers
•Razor Knife
•Hacksaw w/assorted blades
•Slip-Joint pliers
•Vice Grip, locking pliers
•4MM HEX Driver
Page I2Octopus ATM Defense System
Installation and Operation Guide