User's Manual

1.0 Introduction
Prior to bracket installation, the NCR Cassette must be modified to accept the
Octopus ATM Defense System. The procedure includes trimming and cutting
several existing cassette components.
Figure 1
Figure 2
2.0 Modify cover
Remove the cover from the cassette. Remove the top currency guides and
trim-off the FRONT portion of each to make the rails 265mm long (Figure 1).
FRONT
Referring to Figure 2, trim the outside edge of the rail identified to make the
rail 37mm wide.
265mm
37mm
Remove
Remove Raised Rib
Page I3Octopus ATM Defense System
Installation and Operation Guide