User Manual

Octopus Installation & User Manual – APPENDIX A
A1
Appendix A – Preparing for Installation
Each installation has its own special requirements depending on the system configuration
and options selected.
The following configuration options and requirements must be determined prior to
installation:
Mode of protection required (Auto-Arm or Door-Bolt)
Make and model of ATM
Type and number of Cassettes to be protected
Requirement for Breach Sensor Option
Requirement for Note-Stop Option
Requirement for other alarm options: Internal Siren, Bank Alarm Interface
Cassette Assembly
The installation of all CSUs and ink blocks in cassettes must be completed before
installing the Octopus System in the ATM. Installing the CSUs in cassettes beforehand
minimizes down-time during the Octopus System installation.
Field Logistics
It is important to define all personnel involved and their respective responsibilities prior
to beginning the Octopus installation. (Refer to table below)
NOTE - Important: The CSU Ink Block connector must not be
connected until the Octopus System installation is complete, and all
tests have been run.