User Manual

Octopus Installation & User Manual – APPENDIX E
E9
Navigating the Main Menu (Note: Caps lock must be ON)
1. Turn Unit On
a) Press 1 on the keyboard
b) You will receive the following warning screen because you can only turn the unit
ON with serial communications—if you do not have a blue iButton key, you
cannot turn the system OFF once it is On.
c) After you type ―Y,‖ the unit is on but won’t go into Armed state yet. You must
exit this menu by pressing ―Y,‖ then type ―6‖ to exit the main menu.
Note: Remember that there is no way to get back once you exit the main menu
and enter the Armed State, unless you have a key.