User Manual

Octopus Installation & User Manual – APPENDIX E
E14
Charge Current: Shows whether the battery is being charged. If the number is
greater than 100 mA, the unit is being charged.
External Power: Shows whether external power is present or not.
Door-Bolt Mode: Shows whether Door-Bolt Mode is selected or not.
Time Left: Shows the self-test time remaining. Self test will run continuously for 5
minutes (300 seconds) or until a key is pressed to exit.
5. Relay Control Menu
a) The Relay Control Menu allows you to test the MCU relays, which control
external devices (Internal Siren, Note-Stop, etc.). Once in the Relay Control
Menu, type the number you want. (You do not have to press enter after the
number.) Type 5 to exit.
6. Exit Menu
Type ―6‖ to exit the main menu. If you want to Arm the system, you must exit the
menu and then key it on with a blue iButton key.