Portable Speaker and PA System Model NO.
EN Dear Customer, Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use.
EN SAFETY INSTRUCTIONS • Read these instructions. Guard this manual. Obey all alerts. Follow all instructioons • WARNING: T o p revent fire or shock hazard, do not expose this equipment to rain or moisture. Do not store and operate this product near liquid. • Clean only with dry cloth. • Do not store and not operate this product near any heat sources such as radiators and heat registers, stove or other appliances (including amplifiers) that produce heat. Keep this product in a well ventilated place.
EN FRONT VIEW ON OFF CHARGE POWER R 1 Microphone lnput(1/4"): Connect a microphone to this microphone input terminal. 2 MIC VOLUME: Turn this knob to adjust the microphone volume level of the microphone input. 3 ECHO: Use this knob to adjust the microphone volume level of the microphone input. 4 MODE/PRIO: Press this button to toggle between the various inputs (LINE,USB,Memcd,FM, WIRELESS DEVICE) Microphone PRIO: Hold this button to turn on the microphone priority.
EN REMOTE CONTROL 1 POWER: Press this button to power ON/OFF the device. 2 MODE: Press this button to toggle between the various inputs for LINE(AUX), USB, MEMCD, FM , WIRELESS DEVICE. 3 MUTE: Press this button to mute the unit. 4 Track number for selecting the certain track for USB/MEMCD/Press 100+ to go to next 100 track. 5 EQ: Press this button to select the EQ mode of Pop, Rock, Jazz, Classic, Normal for USB/MEMCD.
EN DIGITAL DISPLAY MEMCD INPUT MODES: The LED display screen will display the information of input modes for USB/MEMCD/LINE(AUX)/FM/WIRELESS DEVICE. 1. When a USB flash drive/MEMCD card is inserted into the USB/MEMCD input, the unit will automatically switch to USB/MEMCD mode and begin playing audio files from the USB/MEMCD card. 2. Track Number: The track number from the USB/MEMCD will display at the beginning: WIRELESS DEVICE 3. FM Mode: All FM channels display here.
EN WIRELESS DEVICE OPERATION Pairing 1. Turn on your WIRELESS Device. 2. Turn on the speaker wireless device.the unit will automatically go into pairing mode to search for wireless device. You will know you are in pairing mode when the LED is flashing. 3. If your wireless device is not able to pair to the unit, disconnect the unit's wireless device to break the previous wireless device connections and reset the wireless device module. 4.
EN MICROPHONE On/Off Mute 1. Before powering on the microphone, be sure to set the Microphone Volume Knob to zero.Once the microphone is powered on, slowly increase the microphone volume. 2.If you notice static or distortion in the microphone, check if XLR is fixed to the body properly of echo volume is too high. 3.When not in use, turn off the power of the microphone.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
