User's Manual

06
EN
WIRELESS DEVICE OPERATION
Pairing
BATTEERY
1. Turn on your WIRELESS Device.
2. Turn on the speaker wireless device.the unit will automatically go into
pairing mode to search for wireless device. You will know you are in
pairing mode when the LED is flashing.
3. If your wireless device is not able to pair to the unit, disconnect the unit's
wireless device to break the previous wireless device connections and
reset the wireless device module.
4. Navigate to your wireless device device's setup screen, find BLD speaker
and connect.
5. Wireless device indicator light will light up solid when in connecting.Flashes
twice when pause playback,flashes when ready for pariing.
6. To disconnect pairing, hold PLAY/PAUSE button..
1. Completely charge the battery prior to first use to maximize the battery
lifespan. The unit takes approximately 8 hours to fully charge. The unit
will automatically begin charging once the power cord is connected to
a power source and Power button is set to AC.
The unit will also power on when connected to a power source even if
the battery power is low.
When connected to a power source, the unit will play while also
charging the battery.
When the battery is full, the full charge indicator light on front panel will
turn on solid.
2. Upon completion of the charging, disconnect the power cable.
3. If green battery indicator turns off and only the red low LED lights up,
please power off the unit and begin charging the battery.
4. With standard usage, a fully charged battery can play for about 4-5 hours.
5. Battery can be recharged about 300 times in its life time.
6. When not in use, the speaker should always be turned OFF to prevent the
unit from draining the battery.
When the unit is not used for prolonged periods of time, the battery will
gradually lose its power. It is recommended to fully charge the battery at
least every 60 days.