Datasheet

4D SYSTEMS 3.2” Bezel for the uLCD-32PTU

3.2” Bezel for the uLCD

-32PTU

1. Description

The 4D Systems 3.2” Display Bezel is a plastic bezel

for the uLCD-32PTU display module.

This bezel provides a sleek cover to the uLCD-32PTU

display module, and also providing an easy method

to panel mount the display module into an

enclosure. The bezel mounts the display module,

while also providing a mounting solution into a

panel, keeping all securely together.

Spring clips attach to the bezel in four locations, and

hold it tightly to the enclosure/wall panel, offering

a range of panel thickness from 1mm to 2.5mm

without the need to add washers. If a panel thicker

than 2.5mm is required, washers can be placed

under the spring clip, however this is not

recommended practice.

Please Note, this bezel is only designed for indoor

use. It is not weather tight, nor does it offer any IP

rating. It should only be used indoors in clean

environments as it offers little protection to the

circuitry of moisture or particles.

Bezels are available in Black or White.

Bare 3.2” Bezel - Front

Bare 3.2” Bezel - Back

2. Features

 Plastic 3.2” Bezel designed for panel mounting

the uLCD-32PTU

 Simple cut-out required, no mounting holes

requires to be drilled in the panel

 Brass mounting inserts in the rear of the bezel

 4x Spring Clips for attaching the bezel to the

panel

 8x M2 mounting screws and washers included

uLCD-32PTU Mounted in 3.2” Bezel - Back

uLCD-32PTU Mounted in 3.2” Bezel - Front

Spring Clips