Datasheet

ManualsBrands4D SYSTEMS ManualsDev KitsPCB design board

Uncontrolled Copy when printed or downloaded.

Please refer to the 4D Systems website for the latest Revision of this document

4.3” Embedded SPI Display

4DLCD-FT843

Document Date: 8

January 2014

Document Revision: 1.2

ATASHEET

Summary of content (10 pages)

PAGE 1
DATASHEET 4.3” Embedded SPI Display 4DLCD-FT843 Powered by the FTDI FT800 Video Engine Document Date: 8th January 2014 Document Revision: 1.2 Uncontrolled Copy when printed or downloaded.
PAGE 2
4DLCD-FT843 4.3” Embedded SPI Display Contents 1. Description ............................................................................................................................. 3 2. Features ................................................................................................................................. 3 3. Display Flex Pin Out and Dimensions ....................................................................................... 4 4. Hardware Interface Pins......................
PAGE 3
4DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 1. Description 2. Features The 4DLCD-FT843 is an embedded SPI display from 4D Systems, featuring a 4.3” resistive touch display with an integrated FTDI FT800 Video Engine.  The 4DLCD-FT843 is a powerful SPI Display which enables a SPI host to be connected directly to the display, providing a powerful set of graphics features to the host using the on board FTDI FT800 Video Engine.
PAGE 4
DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 3. Display Flex Pin Out and Dimensions Please note: This is the BACK view of the Display FPC, opposite side to the components on the Flex Flex Pin Out Pin Symbol I/O 1 3.3V P 2 3 4 5 6 7 8 9 10 SCK MISO MOSI CS INT PD AUDIO_SHDN AUDIO_OUT GND I O I I O I O O P Description 3.3V Power Supply for Display Module and FT800 Video Engine. Voltage Input minimum is 3.0V and maximum is 3.6V, 3.3V is recommended.
PAGE 5
4DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 4. Hardware Interface Pins The 4DLCD-FT843 Display features 10 physical pins on the flex. This section describes each in detail. Pin Detail Pin 1: 3.3V - Power Input This is the main power input pin for the display. It powers not only the display logic itself, but also the FT800 Video Engine on board the flex, along with the backlight for the 4.3” display. The recommended voltage is 3.
PAGE 6
4DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display Connection Detail The 4DLCD-FT843 Display features a 10 way flexible FPC, which is designed to connect into a 10 way FPC connector on a PCB. Please note, the display FPC is fragile and contains many components, so the main body of the FPC should not be bent or subjected to excessive forces or be twisted, else the flex may be damaged and the display will no longer function correctly.
PAGE 7
4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 4DLCD-FT843 4.3” Embedded SPI Display 5. Mechanical Dimensions © 2014 4D SYSTEMS Page 7 of 10 www.4dsystems.com.
PAGE 8
4DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 6. Audio Filter and Amplifier Reference Circuit Please note this circuit is not included on any hardware from 4D Systems. This is a reference schematic from FTDI, which can be used to successfully filter and amplify the audio signals coming from the FT800, and therefore 4DLCD-FT843 Display. © 2014 4D SYSTEMS Page 8 of 10 www.4dsystems.com.
PAGE 9
4DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 7. Specifications and Ratings RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage (VCC) Operating Temperature Conditions Typical LCD Life Current Usage Dependant on usage, audio, brightness, processing, GPIO Min 3.0V -10 Typ 3.3V -- Max 3.6V +70 Units V °C -- 20000 -- Hours -- 210 -- mA Min -200 150 100 1 -- Typ -----80 Max <1.
PAGE 10
4DLCD-FT843 4.3” Embedded SPI Display 4D SYSTEMS 4DLCD-FT843 4.3” Embedded SPI Display 8. Legal Notice Proprietary Information The information contained in this document is the property of 4D Systems Pty. Ltd. and may be the subject of patents pending or granted, and must not be copied or disclosed without prior written permission. 4D Systems endeavours to ensure that the information in this document is correct and fairly stated but does not accept liability for any error or omission.