Data Sheet

4D SYSTEMS µCAM-II
© 2014 4D SYSTEMS Page 5 of 22 www.4dsystems.com.au
µCAM
– II Serial Camera Module
3. Pin Configuration and Dimensions
uCAM-II Pin Outs
Pin
Symbol
I/O
Description
1
5V
P
Main Voltage Supply +ve input pin. 4.5V to 9.0V DC range nominal 5V.
2
TX
O
Asynchronous Serial Transmit pin. Connect this pin to host controller Serial
Receive (Rx) signal. The host receives data from uCAM-II via this pin.
3.3V Logic
3
RX
I
Asynchronous Serial Receive pin. Connect this pin to host controller Serial
Transmit (Tx) signal. The host transmits commands to the uCAM-II via this pin.
3.3V Logic, however 5V Tolerant
4
GND
P
Supply Ground.
5
RES
--
Not Connected to anything – N/C.
I = Input, O = Output, P = Power
32mm
32mm
27.5mm
27.5mm
PIN 1
6.9mm
2.1mm Diameter
~6mm
2.54mm
~8.5mm
PIN 1
10.5mm
Varies with Focus
Distance from Pins (centres) to
bottom edge of PCB = 2.3mm
PCB Thickness = ~1.6mm