Datasheet

4D SYSTEMS uLCD-144G2
© 2014 4D SYSTEMS Page 10 of 18 www.4dsystems.com.au
microLCD GOLDELOX DISPLAY
8. Hardware Tools
The following hardware tools are required for full
control of the uLCD-144G2 module.
4D Programming Cable / Adaptor 8.1.
The 4D Programming Cable and uUSB-PA5
Programming Adaptor are essential hardware
tools to program, customise and test the PICASO
Processor.
Either the 4D Programming Cable or the uUSB-PA5
Programming Adaptor can be used.
The 4D programming interfaces are used to
program a new Firmware/PmmC and for
downloading compiled 4DGL code into the
processor. They even serve as an interface for
communicating serial data to the PC.
The 4D Programming Cable and uUSB-PA5
Programming Adaptor are available from 4D
Systems, www.4dsystems.com.au
Using a non-4D programming interface could
damage your processor, and void your Warranty.
4D Programming Cable
uUSB-PA5 Programming Adaptor
Development Hardware 8.2.
4D Systems has designed a development board
compatible with the uLCD-144G2, enabling easy
prototyping to take place and to experiment with
the uLCD-144G2 display module.
This development board is called the 4DevBoard,
and is available from the 4D Systems website
store, or from 4D Systems distributors.