User guide

XSBoxR4v

Network setup

You can connect your PC/laptop to the XSBoxR4v either by using WLAN (wireless) or over a network cable.

In this section you will find the following instructions:

■ Setting-up WLAN connection

■ Setting-up a LAN connection

Please read the user documentation of the relevant manufacturer, should you use an operating system other than Micro-

soft Windows XP

(Service Pack 2) or Microsoft Internet Explorer 5.5 or higher.

WLAN connection setup

The PC/laptop you wish to connect to must support either the WLAN standard IEEE 802.11b

or IEEE 802.11g in order to connect to the XSBoxR4v over WLAN. Should your PC/laptop not support either of these

standards, then you can extend your computer with an external WLAN adapter (e.g. based on USB) or with an internal

WLAN plug-in card.

The following steps are necessary in order to use a WLAN connection between your PC/laptop and the XSBoxR4v:

1. Configure WLAN connection

2. Establish WLAN connection

3. Deactivate proxy server

4. Configure encryption for the XSBoxR4v

5. Configure encryption for your PC/laptop

Note: The following description for setting-up a WLAN connection is described here exemplarily for the WLAN-Adapter Intel® PRO/

Wireless 2200BG Network Connection. Should you use a different WLAN adapter or a WLAN card, then please read in addition

the user documentation from the relevant manufacturer.