User guide

XSBoxR4v
37
Controlling Access with the help of address filters
Administration interface >> Security >> WLAN address filter
Each PC/laptop, which is connected to the XSBoxR4v over the WLAN interface or over LAN, has a clear MAC address
(Media Access Control); these addresses are defined by the device manufacturer. You can control the access of devices
to the WLAN network of the XSBoxR4v by adding the relevant MAC address to the filter lists. You need the MAC addres-
ses of the computers connected in order to compile filter lists. These are usually found on a sticker on the built-in WLAN
card. If in doubt contact your PC/laptop manufacturer. How to control access using filter lists:
1. If you wish to allow or refuse the computer access, then activate the option field marked Allowed adresses or
Blocked Addresses next to Active Filter lists.
2. Click on Add address. Enter the Computer MAC Address for which you would like to allow or refuse
access.
3. Click on the button OK.
4. The MAC address will be added to the appropriate filter list.
5. Add further MAC addresses to the filter lists in this way if desired.