User guide

User Manual
4
Simple installation
There are only a few steps involved in installing your XSBoxR4v, then you can start immediately: Insert your SIM card,
connect to the power supply and enter your SIM card PIN number. Check the HSDPA/GPRS reception quality: six bars
show excellent reception. Should you need to improve reception quality, then move the position of your XSBoxR4v. Enjoy
surfing the internet!
Flexible configuration
The administration interface is the central contact point for the configuration of your XSBoxR4v. All you need to access
the administration interface is a browser on your computer, no additional software needs to be installed. You can log on
comfortably using the protected administration interface and change for example the security settings for WLAN or your
IP address. Each configuration step is supported by a context sensitive help function. It is possible to reset the XSBoxR4v
at anytime back to factory settings.
All-in-one device
XSBoxR4v is a real multi-talent. It unites a WLAN access point, a router/a bridge, a firewall, a DHCP server, a telephone
connector and a HSDPA/GPRS modem in one device. Power consumption is approximately 5W.
Scope of delivery
■ XSBoxR4v
■ Power supply with connecting cable for electricity network (220 - 230 V/50 Hz)
■ LAN cable (Length 3m)
■ CD Rom